H TYPE EXTERIOR SCAFFOLDING

H Type Exterior Scaffolding

It is used as working scaffolding on the building facade. It is easily installed with two people. It is also quick to install and dismantle. It saves a lot of time. The system consists of pier legs and straight and cross rods connecting them. Scaffolding legs are made of 42x2.50 mm industrial pipe and fasteners are made of 27x2.50 mm industrial pipe.
Adjustment shafts are used to get the elevation difference on inclined floors. Steel walking platforms both increase the strength of the scaffold and provide a safe working environment. With the applications such as in-pier ladder or sailor's ladder, safe passage between floors is provided within the pier.
Especially preferred in jacketing applications, Tijli Clamp both increases the strength of the scaffold and provides ease of application.
H (PANEL) TYPE EXTERIOR FRONT ScaffoldING MATERIAL PROPERTIES

 
Elements that make up the scaffold and its technical features:

1- H Type Scaffolding Foot
Size: 880 x 2000 mm
Material used: Side posts, bottom and top records of the pier are made of 42 x 2,50 mm industrial pipe. The interlocking system of the scaffolds is made of 34 x 2,50 mm industrial pipe. There are corner reinforcements from 27 x 2,50 mm industrial pipe to prevent buckling at the upper corners of the pier. There are 4 16 mm butterfly pins on the piers. Cross and straight connecting rods are connected to these pins.
Weight: 14,50 Kg

 
2- Cross Connection Element
Size: 3000 mm
Material used: It is made of 27 x 2,50 mm industrial pipe. There are 20 mm diameter pin holes on both ends of the rods.
Weight: 4.50 Kg
 

3- Straight Fastener
Size: 2500 mm
Material used: It is made of 27 x 2,50 mm industrial pipe. There are 20 mm diameter pin holes on both ends of the rods.
Weight: 4,00 Kg